BMS 14S 50A for Li-Ion battery pack

£29.00

Battery Management System (BMS) for 14S Lithium Ion battery pack, constant current 50A with charging port (split port)

Out of stock

BMS 14S 50A for Li-Ion battery pack, water and dust proof 3 years warranty!. UK stock.

You don’t have to submerse your BMS to have it damaged condensation can damage your BMS too. That is the reason Why all BMS boards I seal are waterproof and dust proof, there is no air gap between electronic components and sealing compound.
If you have any questions please ask.
You can download specification in download section

Basic Parameter

this BMS 14S 50A for Li-Ion battery pack use top quality (A-level) protective integrated circuit IC, from the manufacturer  Seiko of Japan.
Strong load ability, constant discharge current 50A with 120A pick current, use high voltage, low inner resistance  Mosfet.  Anodised aluminium heat sink will greatly help with heat dissipation .
This BMS has power balancing function but if you have great voltage discrepancy between cells it may not be able to balance your battery pack in one go. This circuit is simple and reliable.
BMS is monitoring voltage of each cell group connected in series. So each group will be checked for over charge and over discharge to prevent damage to the cells. Over current and short circuit protection
functionality is very reliable. Long time short circuit of the load won’t affect the PCB and wont damage the battery. Temperature protection during charging and discharging in this BMS is not implemented but we can modify it if  needed (the modyfication has to be done by the manufacturer, at the moment in stock we have only modules without thermal protection). The BMS has extreme low power consumption, the self consumption of the whole device is less than 50uA.
PCB is submersed with solidified high anti-corrosive and water resistant resin, This BMS is suitable for motors up to 1800W constant power. The Main function of this  BMS is to prevent batteries from over charging ,over discharging and shorts.
Constant discharge 50A .
Pick current 120A
Over charge:
detect voltage 4.25 +- 0.05V
delay 0.5S
Charge:
voltage 58.8V
current 8A
Over discharge:
detect voltage 2.8 +- 0.1V
detect delay 20mS
release voltage 2.8 +-0.1V
Over current:
delay 100mS
protection 150 +- 30A
Short circuit detect delay 250uS
Balancing capability 35 +-5mA.
Balance detection voltage 4.18V
Balance relies voltage 4.18V
Self consumption less than 100 micro amp.
Sleep consumption less than 20 micro Amp
More about BMS boards you can read on that page
If you will have any questions you can contact us by sending email or alternatively you can find us on Facebook and YouTube
Weight0.45 kg

Reviews

There are no reviews yet.

Be the first to review “BMS 14S 50A for Li-Ion battery pack”

Your email address will not be published.

You may also like…